SaltDogg 2 Cubic Yard Electric Stainless Hopper Spreader with Pintle Chain Conveyor 1400601SS | Buyers Products
MODEL: Buyers Products 1400601SS
Buyers Products SaltDogg 2 Cubic Yard Electric Stainless Hopper Spreader is ready for commercial use. The 8 ft spreader can fit in the back of an extended-bed 1 ton truck and will work with bulk salt or a 50/50 salt/sand mix. Its electric-powered design means quieter operation with no need for refueling or engine servicing.
The hopper and fully-welded frame are made from long lasting, corrosion resistant 304 stainless steel. A 12 in. wide, all steel pintle chain conveyor provides high speed material flow with its independent 3/4 HP, 12V gear motor.
A lever-operated feedgate offers additional material flow control. A six-fin, 14 in. poly spinner powered by an independent 1/2 HP, 12V motor can cast material 5-30 ft. The stainless steel chute can be extended an extra 11-1/2 in. if needed.
The spreader is operated by an intuitive heavy duty in-cab controller with independent spinner and conveyor speeds. The spreader also comes outfitted with a top screen, stainless steel inverted V, and tie down kit.
SaltDogg 2 Cubic Yard Electric Stainless Hopper Spreader with Pintle Chain Conveyor Features:
- Fits extended-bed 1 ton trucks with above 10,000 lb GVW (gross vehicle weight).
- 96 in. stainless steel hopper with a 2 cubic yard capacity.
- Conveyor and spinner powered by independent electric motors.
- Spreads bulk salt or a 50/50 salt/sand mix.
- In-cab controls with independent variable speeds for the conveyor and spinner.
- 14 in. poly spinner broadcasts up to 30 ft
- 12 in. chain conveyor drive.
- Chute is adjustable up to 11-1/2 in.
- High quality 304 stainless steel construction for optimum corrosion resistance.
- Stainless steel inverted V improves flow and reduces stress on the drive line.
- Top screen and tie downs included.
- Made in the USA.
SaltDogg 2 Cubic Yard Electric Stainless Hopper Spreader with Pintle Chain Conveyor Specifications:
- Chute Primary Material: 304 Stainless Steel
- ChuteStandardAdjustableExtended: Adjustable Height
- Controller Type: High Current Variable Speed
- Drive Type: Electric
- Hopper Length: 96.00 "
- Hopper Material: 304 Stainless Steel
- Number of Motors: 2
- Spinner Material: Polyurethane
- Works with Bagged #1 Rock Salt: Yes
- Works with Bulk Salt: Yes
- Works with Bulk Sand: Yes
- Works with Salt / Sand Mix: Yes
- Capacity: 2.00 yd³
- Overall Height: 32.00 "
- Overall Length: 110.80 "
- Overall Width (at top): 47.00 "
- Hopper Width: 47.00 "
- Top Screen: Yes
- Drive Motor Horse Power: 0.75 HP
- Spinner Motor Horse Power: 0.50 HP
- Vibrator Included?: No
- Spinner Diameter: 14.00 "
- Spreading Width Range: 5 To 30 '
- System Voltage: 12 vdc
- Feed Mechanism: Conveyor Chain
- Feed Mechanism2: 12 in. Pintle Chain Conveyor
- Shipping Weight: 995
- Chute Primary Material: 304 Stainless Steel